ReliaCOR 31-11/33-11
The ReliaCOR 31-11/33-11 series are fanless embedded Edge AI systems based on NVIDIA® Jetson Orin™ NX / NVIDIA® Jetson AGX Orin™ platforms.
These platforms have been designed for demanding industrial AI applications in areas such as automotive vehicles, security and surveillance, robotics, industrial automation, and smart cities.
The OS supported by this ESF version is Ubuntu 22.04.6 LTS with JetPack. All the descriptions below are specific to this OS version.
ESF Installer
ESF must be installed using the esf-generic_<version>_amd64.deb debian package (version with network management support) or esf-generic-nn_<version>_amd64.deb (version without network management support).
Network & Firewall Configuration
On the ReliaCOR 31-11, the interfaces are configured as follows:
| JCO-3000-ORN-B (4LAN) | |
|---|---|
| First Ethernet interface | LAN 1 as in picture below |
| Second Ethernet interface | LAN 2 as in picture below |
According to the hardware variants, the interfaces are configured as follows on the ReliaCOR 33-11:
| JCO-6000-ORN-A (2EBIO) with EDGEBOOST I/O Ethernet Bracket | JCO-6000-ORN-A (2EBIO) without EDGEBOOST I/O Ethernet Bracket | |
|---|---|---|
| First Ethernet interface | first in lexicographic ordering of labels | GbE LAN as in picture below |
| Second Ethernet interface | second in lexicographic ordering of labels | 10 GbE as in picture below |
The configuration of First Ethernet interface and Second Ethernet interface is specified in the Initial network configuration section. For the initial firewall setup, please refer to the firewall configuration of the Generic Profiles.
Modem Support
The modem support has not yet been finalized for the ReliaCOR 33-11 device. Modem is working on ReliaCOR 31-11.
GPS support
The GPS support has not yet been finalized for these devices.
Bluetooth support
The bluetooth support has not yet been finalized for these devices.
Journald Persistence
The systemd journal is not persisted. During framework operation, the following ESF logs are shown:
ESF[1020]: failed to store cursor
The logs are due to a wrong initial configuration for the Journald Log Reader component. For the ReliaCOR 33-11 the configuration must be changed specifying Journal Cursor Path property to an empty value. Refer to section Journald Log Reader for more details.
AIDE Intrusion Detection Configuration
The default AIDE configuration from section AIDE Intrusion Detection can be applied to this device, since the generic ESF profile is used, it may be necessary to add the exception described in the Note about NetworkManager section.
Serial Configuration
The serial port configuration support has not yet been finalized for these devices.
GPIO Mapping
The GPIO mapping has not yet been finalized for these devices.
Watchdog Service
The watchdog service is working with its default configuration using the device /dev/watchdog1.
Updated 17 days ago