ESF 7.6 Upgrade Changes
This section will list the changes and upgrades made in ESF 7.6.0 and that need to be considered when updating from a previous release. It is possible to perform an upgrade from ESF 7.0.2, ESF 7.1.x, ESF 7.2.x, ESF 7.3.x, ESF 7.4.x and 7.5.x to ESF 7.6.0 and the upgrader will preserve existing configurations.
ReliaGATE/DynaGATE 10-14 Serial Port Configurator
In ESF 7.5.x and before, the Serial Port Configurator component for 10-14 allowed to configure only the COM1 port, forcing COM0 in RS232 mode.
ESF 7.6.0+ provides a new Serial Port Configurator that allows to configure both COM0 and COM1 serial ports, in this version the com1.mode property defined previously is replaced by a new com.modes property that covers all mode combiation supported by the line driver.
ESF Upgrader will set the value of the new com.modes property basing of the value of the old com1.mode property preserving the serial port configuration that was in place before the upgrade. The old com1.mode property will be ignored by ESF 7.6 if specified as part of a configuration update. For more details see the ReliaGATE/DynaGATE 10-14 page.
Updated about 2 months ago