These docs are for v7.2.0. Click to read the latest docs for v7.5.0.

RaspberryPi

ESF for RaspberryPi an evaluation-only version of ESF, not tailored for production.

Ethernet Configuration

The default configuration of the Ethernet interfaces for the RaspberryPi is the following:

Interface NameGateway LabelStatus
eth0N/AEnabled for WAN - DHCP Client

Wireless Configuration

The wireless interface of the RaspberryPi is the wlan0.
By default, the interface is disabled.

To set the right Wi-Fi regulatory domain based on your current world region following the instructions here In case of problems, you could try to edit the /etc/default/crda adding the ISO 3166-1 alpha-2 code of your region

Firewall Configuration

The default ESF firewall configuration for the the RaspberryPi is as follows:

PortProtocolPermitted NetworkPermitted Interface Name
67udp0.0.0.0/0eth0
67udp0.0.0.0/0wlan0
53udp0.0.0.0/0eth0
53udp0.0.0.0/0wlan0
443tcp10.234.0.0/16tun0
443tcp0.0.0.0/0eth0
4443tcp10.234.0.0/16tun0
4443tcp0.0.0.0/0eth0
22tcp10.234.0.0/16tun0
22tcp0.0.0.0/0eth0
5353udp0.0.0.0/0eth0

Clock Service

NTS is supported via chrony-advance option only with chrony version greater then 4.x installed.

GPIO

🚧

The GPIO configuration provided by ESF is relative to Raspberry PI version 3 or more. If you have an older device use the following jdk.dio.properties file to update your configuration, then reboot ESF.

#
# Copyright (c) 2011, 2014 Eurotech and/or its affiliates
#
#  All rights reserved. This program and the accompanying materials
#  are made available under the terms of the Eclipse Public License v1.0
#  which accompanies this distribution, and is available at
#  http://www.eclipse.org/legal/epl-v10.html
#
# Contributors:
#   Eurotech
#

5 = deviceType: gpio.GPIOPin, pinNumber:5, name:GPIO05
6 = deviceType: gpio.GPIOPin, pinNumber:6, name:GPIO06
12 = deviceType: gpio.GPIOPin, pinNumber:12, name:GPIO12
13 = deviceType: gpio.GPIOPin, pinNumber:13, name:GPIO13
16 = deviceType: gpio.GPIOPin, pinNumber:16, name:GPIO16
17 = deviceType: gpio.GPIOPin, pinNumber:17, name:GPIO_GEN0
18 = deviceType: gpio.GPIOPin, pinNumber:18, name:GPIO_GEN1
19 = deviceType: gpio.GPIOPin, pinNumber:19, name:GPIO19
20 = deviceType: gpio.GPIOPin, pinNumber:20, name:GPIO20
21 = deviceType: gpio.GPIOPin, pinNumber:21, name:GPIO21
22 = deviceType: gpio.GPIOPin, pinNumber:22, name:GPIO_GEN3
23 = deviceType: gpio.GPIOPin, pinNumber:23, name:GPIO_GEN4
24 = deviceType: gpio.GPIOPin, pinNumber:24, name:GPIO_GEN5
25 = deviceType: gpio.GPIOPin, pinNumber:25, name:GPIO_GEN6
26 = deviceType: gpio.GPIOPin, pinNumber:26, name:GPIO26
27 = deviceType: gpio.GPIOPin, pinNumber:27, name:GPIO_GEN2

gpio.GPIOPin = initValue:0, deviceNumber:0, direction:3, mode:-1, trigger:3
uart.UART = baudRate:19200, parity:0, dataBits:8, stopBits:1, flowControl:0