These docs are for v7.2.0. Click to read the latest docs for v7.5.0.

Modbus Application

This tutorial will show how to collect data from a Modbus device and publish it on a cloud platform using Wires. The Modbus device will be emulated using a software simulator, like ModbusPal.

Configure Modbus device

  1. Download ModbusPal on a computer that will act as a Modbus slave.
  2. Open ModbusPal application as root and click on the “Add” button under the “Modbus Slaves” tab to create a Modbus slave device. Select an address (i.e. 1) and put a name into the “Slave name” form.
  3. Click on the button with the eye to edit the slave device. Once the window is opened, add a coil with address 1 and set a value (0 or 1).
  4. Close the editor and on the main window, click on the “TCP/IP” button under the “Link Settings” tab. Set the “TCP port” to 502. Be sure that the selected TCP port is opened and reachable on the system.
  5. Click on “Run” button to start the device.
907

Configure Wires Modbus application

  1. Install the Modbus driver from Eclipse Kura Marketplace
  2. In the ESF Administrative Web Interface, create a new driver instance:
    • Under Drivers and Assets, click the New Driver button
    • Select org.eclipse.kura.driver.modbus, type in a name, and click Apply: a new service will show up in the Drivers and Assets table.
  3. Configure the new service as follows:
    • access.type: TCP
    • modbus.tcp-udp.ip: IP address of the system where ModbusPal is running
    • modbus.tcp-udp.port: 502
  4. Click on Wires in System
  5. Add a new Timer component and configure the interval at which the Modbus slave will be sampled
  6. Add a new Asset with the previously added Modbus driver
  7. Configure the new Modbus asset, adding a new Channel with the following configuration:
    • name: a custom cool name
    • type: READ_WRITE
    • value type: BOOLEAN
    • unit.id: the Modbus slave address configured in ModbusPal (i.e. 1)
    • primary.table: COILS
    • memory.address: the Modbus coil address configured in ModbusPal (i.e. 1)
  8. Add a new Publisher component and configure the chosen cloud platform stack in cloud.service.pid option
  9. Add a Logger component
  10. Connect the Timer to the Asset, and the Asset to the Publisher and Logger.
  11. Click on Apply and check the logs and cloud platform that the data is correctly published.
2364

Interact with the Asset using REST APIs

Using an application like Postman, the user can interact with the Assets defined in the system.

1280

📘

Have a look to the Rest Service page to learn more about REST APIs in ESF and how to use them.

Assets REST APIs are available in the context path /services/assets.
In Postman, the user needs to define a new GET request specifying <gatewayip>/services/assets to get the list of assets available for the target gateway.

970

In order to correctly perform the REST call, the user may need to specify Basic Authentication and a proper Username and Password

968

Once specified the desired asset in the request URL, the user may be able to get the list of Channels configured in the Asset

964

And read all the data from those channels

969

Using a POST, the user can also read specific channels that can be defined in the request Body.

967

The user can also use the REST APIs to perform writes to one or more channels.

966