RaspberryPi
ESF for RaspberryPi an evaluation-only version of ESF, not tailored for production.
Ethernet Configuration
The default configuration of the Ethernet interfaces for the RaspberryPi is the following:
| Interface Name | Gateway Label | Status |
|---|---|---|
| eth0 | N/A | Enabled for WAN - DHCP Client |
Wireless Configuration
The wireless interface of the RaspberryPi is the wlan0.
By default, the interface is disabled.
To set the right Wi-Fi regulatory domain based on your current world region following the instructions here In case of problems, you could try to edit the /etc/default/crda adding the ISO 3166-1 alpha-2 code of your region
Firewall Configuration
The default ESF firewall configuration for the the RaspberryPi is as follows:
| Port | Protocol | Permitted Network | Permitted Interface Name |
|---|---|---|---|
| 67 | udp | 0.0.0.0/0 | eth0 |
| 67 | udp | 0.0.0.0/0 | wlan0 |
| 53 | udp | 0.0.0.0/0 | eth0 |
| 53 | udp | 0.0.0.0/0 | wlan0 |
| 443 | tcp | 10.234.0.0/16 | tun0 |
| 443 | tcp | 0.0.0.0/0 | eth0 |
| 4443 | tcp | 10.234.0.0/16 | tun0 |
| 4443 | tcp | 0.0.0.0/0 | eth0 |
| 22 | tcp | 10.234.0.0/16 | tun0 |
| 22 | tcp | 0.0.0.0/0 | eth0 |
| 5353 | udp | 0.0.0.0/0 | eth0 |
Clock Service
NTS is supported via chrony-advance option only with chrony version greater then 4.x installed.
GPIO
The GPIO configuration provided by ESF is relative to Raspberry PI version 3 or more. If you have an older device use the following
jdk.dio.propertiesfile to update your configuration, then reboot ESF.
#
# Copyright (c) 2011, 2014 Eurotech and/or its affiliates
#
# All rights reserved. This program and the accompanying materials
# are made available under the terms of the Eclipse Public License v1.0
# which accompanies this distribution, and is available at
# http://www.eclipse.org/legal/epl-v10.html
#
# Contributors:
# Eurotech
#
5 = deviceType: gpio.GPIOPin, pinNumber:5, name:GPIO05
6 = deviceType: gpio.GPIOPin, pinNumber:6, name:GPIO06
12 = deviceType: gpio.GPIOPin, pinNumber:12, name:GPIO12
13 = deviceType: gpio.GPIOPin, pinNumber:13, name:GPIO13
16 = deviceType: gpio.GPIOPin, pinNumber:16, name:GPIO16
17 = deviceType: gpio.GPIOPin, pinNumber:17, name:GPIO_GEN0
18 = deviceType: gpio.GPIOPin, pinNumber:18, name:GPIO_GEN1
19 = deviceType: gpio.GPIOPin, pinNumber:19, name:GPIO19
20 = deviceType: gpio.GPIOPin, pinNumber:20, name:GPIO20
21 = deviceType: gpio.GPIOPin, pinNumber:21, name:GPIO21
22 = deviceType: gpio.GPIOPin, pinNumber:22, name:GPIO_GEN3
23 = deviceType: gpio.GPIOPin, pinNumber:23, name:GPIO_GEN4
24 = deviceType: gpio.GPIOPin, pinNumber:24, name:GPIO_GEN5
25 = deviceType: gpio.GPIOPin, pinNumber:25, name:GPIO_GEN6
26 = deviceType: gpio.GPIOPin, pinNumber:26, name:GPIO26
27 = deviceType: gpio.GPIOPin, pinNumber:27, name:GPIO_GEN2
gpio.GPIOPin = initValue:0, deviceNumber:0, direction:3, mode:-1, trigger:3
uart.UART = baudRate:19200, parity:0, dataBits:8, stopBits:1, flowControl:0
Updated over 2 years ago