ReliaGATE 20-25
The ReliaGATE 20-25 is a high-performance, LTE ready and Cloud certified Multi-service IoT Edge Gateway for industrial and lightly rugged applications.
ESF Installers
Eurotech provides two ESF distributions for the ReliaGATE 20-25, the installer variant must be selected depending on the installed Linux version.
Linux version | ESF installer prefix |
---|---|
23.0.0 | esf-reliagate-20-25-systemd |
22.0.0 and before | esf-reliagate-20-25 |
GPS Configuration
The REGATE-20-25-x6 ordering codes provide a dedicated GPS device, in other ordering codes, GPS is provided by internal modem or by external ReliaCELL 10-20 module.
In all cases ESF PositionService default configuration should work out of the box. If the GPS is provided by the modem, then it must be enabled in the network configuration section of ESF Web UI.
Ethernet Configuration
The naming scheme of Ethernet interfaces depends on the Linux image version.
The default configuration of the Ethernet interfaces for a ReliaGATE 20-25 with Eurotech Linux 23 is the following:
Interface Name | Gateway Label | Status |
---|---|---|
enp3s0 | ETH0 | Enabled for LAN - Static address 172.16.0.1 with DHCP server |
enp4s0 | ETH1 | Enabled for WAN - DHCP Client |
The default configuration of the Ethernet interfaces for a ReliaGATE 20-25 with Eurotech Linux 22 and before is the following:
Interface Name | Gateway Label | Status |
---|---|---|
eth0 | ETH0 | Enabled for LAN - Static address 172.16.0.1 with DHCP server |
eth1 | ETH1 | Enabled for WAN - DHCP Client |
Wireless Configuration
The ReliaGATE 20-25 has a WiFi interface, named wlan0 on Eurotech Linux 22.0.0 and before and wlp1s0 on Eurotech Linux 23.0.0.
The default ESF configuration enables the Wi-Fi interface of the ReliaGATE 20-25.
This interface is Enabled and configured in Access-point mode
Firewall Configuration
Following the ESF firewall configuration for the ReliaGATE 20-25, depending on Eurotech Linux version:
Eurotech Linux 23.0.0
Port | Protocol | Permitted Network | Permitted Interface Name |
---|---|---|---|
8000 | tcp | 0.0.0.0/0 | enp3s0 |
67 | udp | 0.0.0.0/0 | enp3s0 |
67 | udp | 0.0.0.0/0 | wlp1s0 |
53 | udp | 0.0.0.0/0 | enp3s0 |
53 | udp | 0.0.0.0/0 | wlp1s0 |
5002 | tcp | 127.0.0.1/32 | |
1450 | tcp | 0.0.0.0/0 | enp3s0 |
80 | tcp | 10.234.0.0/16 | |
80 | tcp | 0.0.0.0/0 | enp3s0 |
22 | tcp | 10.234.0.0/16 | |
22 | tcp | 0.0.0.0/0 | enp3s0 |
5353 | udp | 0.0.0.0/0 | enp3s0 |
Eurotech Linux 22.0.0 and before
Port | Protocol | Permitted Network | Permitted Interface Name |
---|---|---|---|
8000 | tcp | 0.0.0.0/0 | eth0 |
67 | udp | 0.0.0.0/0 | eth0 |
67 | udp | 0.0.0.0/0 | wlan0 |
53 | udp | 0.0.0.0/0 | eth0 |
53 | udp | 0.0.0.0/0 | wlan0 |
5002 | tcp | 127.0.0.1/32 | |
1450 | tcp | 0.0.0.0/0 | eth0 |
80 | tcp | 10.234.0.0/16 | |
80 | tcp | 0.0.0.0/0 | eth0 |
22 | tcp | 10.234.0.0/16 | |
22 | tcp | 0.0.0.0/0 | eth0 |
5353 | udp | 0.0.0.0/0 | eth0 |
Modem Support
The ordering codes from REGATE-20-25-x2 to REGATE-20-25-x5 do not have an internal modem. An external ReliaCELL 10-20 can be added to provide cellular connectivity.
The ordering codes from REGATE-20-25-x7 to REGATE-20-25-x8 have an internal modem.
In all cases modem support should be provided out of the box by ESF.
Updated about 4 years ago