---
updatedAt: 2025-11-05T20:34:46.000Z
agentTools:
  projectIndex: https://esf.eurotech.com/v6.0.0/llms.txt
---

# How to use the ReliaIO 10-12

The Eurotech ReliaIO 10-12 is an IO expansion module for the ReliaGATE 10-12. It offers 4 isolated digital inputs, 4 isolated digital outputs and 4 protected analog inputs. The `com.eurotech.framework.reliaio` package provides all the bundles, libraries and Drivers needed to exploit the features of this module.

## Digital IOs

Once installed on the gateway, the digital IOs can be used with the [ESF GPIO Driver](gpio-driver). The new ReliaIO GPIOs will be available on the drop-down list of the **resource name** column when the module is attached to the device.

![2372](https://files.readme.io/f3ee1cf-ReliaIODIO.png "ReliaIODIO.png")

The Digital IO provided by the Driver are listed below. Note that their names are made with the pin names (printed in to the enclosure) with the **RIO\_** prefix.

* **Digital Output**
  * RIO\_DOUT1
  * RIO\_DOUT2
  * RIO\_DOUT3
  * RIO\_DOUT4
* **Leds**
  * RIO\_EXP\_USER1
  * RIO\_EXP\_USER2
* **Digital Input**
  * RIO\_DIN1
  * RIO\_DIN2
  * RIO\_DIN3
  * RIO\_DIN4

> 🚧 The ReliaIO 10-12 does not support unsolicited inputs. So, selecting the **listen** button has no effect.

## Analog Inputs

The aforementioned ReliaIO package provides also a Driver to manage the analog inputs. It can be installed following the usual instructions for instantiating Wire Drivers.

![2076](https://files.readme.io/e0e2093-ReliaIOAnalogDriver.png "ReliaIOAnalogDriver.png")

Once installed, it doesn't need any configuration. The corresponding asset can be configured as follows:

* **enabled**: it allows to enable/disable the channel. If it isn't selected the channel will be ignored.
* **name**: the channel name.
* **type**: the channel type, (`READ`, `WRITE`, or `READ_WRITE`).
* **value.type**: the Java type of the channel value. The value read by the Driver will be converted to the **value.type**. Conversely, in write operations the Driver will accept value of this kind.
* **listen**: it is **not** supported for this kind of channel. Selecting it has no effect.
* **resource.name**: the name of the analog ports. They can be:
  * RIO\_AIN1
  * RIO\_AIN2
  * RIO\_AIN3
  * RIO\_AIN4