---
updatedAt: 2025-11-05T21:16:16.000Z
agentTools:
  projectIndex: https://esf.eurotech.com/llms.txt
---

# BoltGATE 20-25

The BoltGATE 20-25 is a Multi-service IoT Edge Gateway designed for rolling stock applications.

## GPS Configuration

The BoltGATE 20-25 can be equipped with an internal GPS device. The ESF Position Service can be configured to use the **serial provider** for reading GPS data. Depending on the installed EL version, the configuration for the **port** is as follows:

* EL 21.4.0, EL 30.1.0: `port=1-5.2.4`
* EL 40.0.0: `port=/dev/ttyACM6` (resulting from following the symlink `/dev/ttyGPS0 -> ttyACM6`)

> 📘 gpsd provider
>
> It is preferrable to use the **gpsd** provider, which is available since **EL 30.1.0**.

## Ethernet Configuration

The default configuration of the Ethernet interfaces for a BoltGATE 20-25 is the following:

| Interface Name | Gateway Label | Status                                                       |
| :------------- | :------------ | :----------------------------------------------------------- |
| enp3s0         | ETH1          | Enabled for LAN - Static address 172.16.0.1 with DHCP server |
| enp4s0         | ETH2          | Enabled for WAN - DHCP Client                                |

## Wireless Configuration

The wireless interface of the BoltGATE 20-25 is the **wlp1s0**. By default, the interface is **disabled**.

To set the right Regulatory Domain create or edit the file **/etc/modprobe.d/cfg80211.conf**\
with the following content and then reboot the system.

```shell cfg80211.conf
options cfg80211 ieee80211_regdom=<your regulatory domain>
```

## Firewall Configuration

The default ESF firewall configuration for the the BoltGATE 20-25 is as follows:

| Port | Protocol | Permitted Network | Permitted Interface Name |
| :--- | :------- | :---------------- | :----------------------- |
| 67   | udp      | 0.0.0.0/0         | enp3s0                   |
| 67   | udp      | 0.0.0.0/0         | wlp1s0                   |
| 53   | udp      | 0.0.0.0/0         | enp3s0                   |
| 53   | udp      | 0.0.0.0/0         | wlp1s0                   |
| 443  | tcp      | 10.234.0.0/16     | tun0                     |
| 443  | tcp      | 0.0.0.0/0         | enp3s0                   |
| 4443 | tcp      | 10.234.0.0/16     | tun0                     |
| 4443 | tcp      | 0.0.0.0/0         | enp3s0                   |
| 22   | tcp      | 10.234.0.0/16     | tun0                     |
| 22   | tcp      | 0.0.0.0/0         | enp3s0                   |

## Modem Support

ESF natively supports the BoltGATE 20-25 internal modem.

## Journald Persistence

**EL 21.4.0** uses in RAM journal

## AIDE Intrusion Detection Configuration

The default AIDE configuration from section "AIDE Intrusion Detection" can be applied to this device. An exception must be added if using **EL 21.4.0** to avoid false tampering events for the file `/etc/timestamp`:

```
NORMAL = p+n+u+g+s+selinux+sha256
/etc NORMAL
/opt NORMAL
!/etc/bind/named.conf
!/etc/resolv.conf
!/etc/adjtime*
!/etc/timestamp
```

The file `/etc/timestamp` is used by Everyware Linux on version 21.4.0 to maintain a backup timestamp, hence it may change during the gateway's lifecycle.

## Clock Service

If using **EL 21.4.0**, in order to be able to use the chrony-advanced option in the clock service configuration, chrony must be manually installed on the system, this is due to the fact that the `chrony `package conflicts with the `ntp` package, and the latter is installed by default.\
The following command can be used to install the `chrony` package and uninstall the `ntp` package:

```shell
dnf install --allowerasing chrony chronyc
```

The `chrony` service will be managed by ESF, so we recommend to disable the service after installation.

```shell
systemctl stop chronyd
systemctl disable chronyd
```

> 📘
>
> NTS is not supported by chrony on this platform with **EL 21.4.0**.

## Forward Secure Sealing (FSS)

**EL 21.4.0** does not support FSS verification to detect log file tampering.

## Watchdog Service

If the watchdog service is enabled it will not be possible to stop it. From the ESF console, if the service gets disabled it will just prevent the watchdog from starting at the next reboot of the system.

## Diagnostic Service

> 📘 rootfs usage alerts after fresh ESF installation
>
> On **EL 30.1.0** ESF might produce warning alerts about the rootfs usage, since the occupied space after installation is about 90% of the rootfs partition. You might want to tweak such threshold from the Diagnostic Service configuration to disable the warnings.

## Network Threat Manager

The flooding protection and fail2ban features are enabled by default.